High Performance for less!
 |
|
|
|
|
|
|
 |
|
|
|
|
JXF 3-D Performance Propellers |
|||
|
JXF aka Xoar Propellers are made from the highest quality Beech wood from Germany JXF props are digitally CNC machined. Each prop has 2 layers of primer and 2- coats of high gloss clear coat for high shine. Each prop is precision balanced and pre-drilled. Note! No International sales on propellers due to high shipping costs. JXF -17X6 Price - $17.00 JXF -17X8 Price - $17.00 JXF - 18X6Price - $19.00 |
JXF- 20X10 Price - $22.00 JXF - 22X10Price - $24.00 JXF - 23X8Price - $27.00 JXF - 24X8Price - $30.00
| |
|
Engine Accessories
|
|||
 |
Aluminum Throttle Arm CNC Machined Aluminum throttle arm for Walbro and Zama Carburetors. This throttle arm is adjustable with a set scre and included allen wrench. Arm is tapped for 2-56 thread to accept a ball link. |
Aluminum Throttle Arm Price - $8.00 | |
|
Carburators |
|||
 |
Walbro WYK-16 Carburetor Brand new Walbro WYK-16 - 10.5mm venturi makes a perfect upgrade for the Honda GX35 Engine. This carburetor is equipped with auto adjust high speed needle and accelerator pump for improved throttle response and consistent fuel pressure. |
Walbro
WYK-16
Price - $40.00
|
|
|
|
Velocity Stack Improve throttle response and effectively burn more fuel that would otherwise be wasted by reducing fuel spit-back. A velocity stack will gain you a slight bit of power by allowing you to run your engine at a more lean needle setting. Perfect fit for BCMA-SPE26/40/3MM53TOC Engines. |
Velocity Stack Price - $6.00
|
|
|
Mounting Accessories
|
|||
|
|
SPE Engine Mount Stand-offs CNC Machined aluminum stand-offs for engine mounting situations where extra length is required. These stand-offs are a direct replacement for the stand-offs provided with the BCMA-SPE Engines. 45mm ~ 1-3/4" 50mm ~ 2"
|
45mm
Stand-offs
Price - $25.00 50mm Stand-offsPrice - $25.00
|
|
|
Machined Aluminum Engine Mount Back Plates |
|||
|
1/4" CNC Machined aluminum mounting plate for engine mounting situations where flush mount to firewall is required. This plate can also be used if extra length is required where stand-offs can be mounted to the back of the plate. (extra stand-offs available separately) Mounting hardware is included. |
Mounting
Plate BCMA-62 Pro
Price - $18.00
|
|
|
Spark Plugs |
|||
|
NGK Resistor Spark Plugs |
|||
 |
Champion RC6JY This is a replacement resistor sparkplug for the older BCMA-SPORT26/40 engines. This plug is 3/4" and will work with most any 2-stroke engine needing a "hot" plug. It never hurts to have a spare plug in your field box.
|
Champion
RC6JY - 3/4"
Price - $3.00 |
|
 |
NGK BPMR6F
This is a replacement
resistor sparkplug for the new BCMA-SPORT26/40/60 engines. This plug is
5/8" and will work with most any 2-stroke engine needing a "hot" plug.
It never hurts to have a spare plug in your field box.
|
NGK BPMR6F
5/8"
Price - $3.00
|
|
|
Nippon Denso Non-Resistor Spark Plugs (10mm Thread) |
|||
|
|
Denso U20MU
Will work with Zenoah, DA, 3W, ZDZ, Evolution engines equipped with this compact sized plug. |
Denso U20MU Spark Plug 10mm Price - $5.00
|
|
|
Electronic
Accessories |
|||
|
Hi-Capacity/Feather Weight Ignition Battery TOC Championship Series 3.7V 2600mAh Ultra High Capacity Li-Ion Rechargeable Battery Pack. Perfect match for BCMA-eXL ignition modules. Premium quality Lithium Ion Cells manufactured by LG for maximum durability and longevity compared to more volatile Li-Po cells. Battery weighs a mere 2 ounces.Futaba/Hitec/JR standard battery connector.
|
2600mAh
Li-Ion
Battery Pack
Price - $25.00
|
||
|
|
Voltage Regulator - 5.0V This regulator can be used for on-board ignition systems and/or on-board radio equipment. This allows you to use higher than rated voltage batteries such as 2/3 cell lipos, 6-12v nimh batteries to power your onboard equipment at a rock solid 5 volts at 3/4 of an amp. This device plugs inline between battery and switch. Hitec/JR standard battery connector. Note! Use for Electronic Ignition Only! Current is not high enough to supply High Power Radio Equipment.
|
BCMA-VR5.0
Price - $15.00
|
|
|
|
Opto-Coupled Remote Ignition Kill Switch This device allows you to safely and remotely kill your electronic ignition equipped engine from your transmitter. This device is opto coupled to isolate your ignition from your radio equipment to unsure interference free operation. Includes an LED light to indicate that the ignition is armed when on.
Hitec/JR standard battery connector. This device is for engines with electronic ignitions only.
|
BCMA-Opto-Kill
Price - $30.00
|
|
|
|
Remote Ignition Kill Switch This device allows you to safely and remotely kill your magneto ignition equipped engine from your transmitter. This device is used for engines that have a magneto type ignition such as Zenoah, Fuji, Quadra, and Conversion type engines.
Hitec/JR standard battery connector. This will not work properly for engines with electronic ignitions.
|
BCMA-Mag-Kill
OUT OF STOCK
Price - $25.00
|
|
|
Fuel Accessories and Smoke Systems |
||
|
Gas/Glow Quick Fuel Valve |
Quick
Fueling Valve
Price - $10.00
|
 |
Tygon Fuel Tubing -
3/32" - 3' Yellow Tygon fuel tubing resists gasoline, diesel, and kerosene fuels. Tubing is sold in increments of 3ft and has an inner diameter of 3/32". |
Tygon Fuel Line - 3/32" X 3' Price - $3.00
|
 |
Dubro Gas Tank Conversion
Stopper |
Dubro Gas Tank Stopper Price - $3.00
|
|
|
|
|
|
|
|
|
|
|
|
|
